High Performance Race Tornado 7.25" 185MM 1FZ-FE Triple Plates Race Clutch For Toyota Landcruiser

Technical Parameters

Product Advantage

• Triple Plate Design, Maximum Holding Capacity

Three 185 mm friction discs working between a billet pressure ring and twin floater plates multiply friction surface far beyond any single or twin disc setup. Capacity is engineered for extreme 1FZ-FE builds, reliably supporting output well past 800 hp​ on supercharged and turbocharged conversions. Three plates also share the clamp load, so pedal effort stays more manageable than most expect from a triple plate.

• Built for Sustained Load and Heat

Land Cruisers work hard: steep climbs, deep sand, heavy towing, long hours at low speed under high torque. This 185mm racing clutch kit​ is engineered for exactly that duty cycle. Billet aluminum draws heat away from the friction faces far faster than a stamped steel cover, resisting fade through repeated heavy launches and sustained load, while the extra friction surfaces spread heat across a much larger area.

• Compact Size, Still Low Inertia

Holding diameter to 185 mm keeps rotating mass concentrated near the crankshaft centreline, so the engine revs freely and the driveline responds quickly. Low inertia helps the engine recover between shifts and reduces stress during sudden load changes — a genuine advantage in technical terrain where quick throttle corrections and precise clutch modulation keep you moving instead of stalling.

• Cerametallic Friction, Race-Proven

Each disc uses a sintered cerametallic friction face developed for competition. It keeps biting at temperatures that would destroy an organic disc, and delivers controllable, progressive modulation rather than an unpredictable on/off switch, so you can slip the clutch deliberately when crawling or recovering. Heavy-duty drive straps handle the shock loads of off-road abuse and sudden traction changes.

• Rebuildable and Individually Balanced

Friction discs, floater plates and drive components are individually replaceable, so a rebuild costs a fraction of a complete kit — valuable when the vehicle is far from home. Every unit is CNC-machined under tight tolerance control, dynamically balanced and serialised, with flatness and runout verified before dispatch.

Product Uses

• High-Output Supercharged and Turbocharged Builds

A heavily boosted 1FZ-FE produces torque the factory clutch was never designed to hold, especially in low range where gearing multiplies the load enormously. This 7.25" triple plate race clutch​ handles output well past 800 hp​ without slipping, so boost, larger tyres and heavy loads stop being limited by the clutch. It is the foundation that lets the rest of the driveline survive.

• Rock Crawling and Technical Off-Road

Crawling demands constant clutch slipping, precise modulation and repeated heat cycles at low speed, conditions that glaze and overheat a standard clutch. The cerametallic faces and billet aluminum construction manage heat far better, while progressive engagement lets you feather the clutch with control. Low rotating mass also helps the engine respond instantly when a correction is needed on a ledge.

• Desert Racing and High-Speed Off-Road

Sustained high-speed running through sand and whoops generates continuous heat and driveline shock. This 185mm racing clutch kit​ sheds heat efficiently and holds capacity through long, punishing sections, with three friction surfaces sharing the thermal load. Consistent pedal feel means predictable shifts when terrain changes suddenly, and discs can be refreshed between stages rather than replacing the whole assembly.

• Heavy Towing and Expedition Use

Loaded expedition Cruisers and tow rigs place sustained torque through the clutch for hours at a time. The triple plate layout spreads that load across three friction surfaces, dramatically reducing wear and heat build-up compared with a single disc. For overlanding where reliability matters more than outright performance, this is the upgrade that prevents a remote-area clutch failure ending the trip.

• Competition and Rally-Raid Builds

Rally-raid and competition Cruisers need a clutch that survives repeated hard launches, sudden traction changes and constant shock loading. Rigid construction and cerametallic friction handle repeated abuse without fade, while individually replaceable components keep running costs manageable across a season. Predictable modulation helps the driver hold traction when grip changes without warning.

• Engine Conversions and Drivetrain Upgrades

Swapping a 1FZ-FE into another chassis, or upgrading to a stronger manual gearbox, usually leaves the original clutch mismatched to the new combination. This kit bolts directly to H150F / H151F five-speed manuals without custom machining or adapter plates.

FAQ